Safety Courses Open To The Public

OSHA Courses for Your Construction Employees

Call today

OSHA 10 Hour Course

OSHA Construction Safety Courses.

The Construction Industry’s most requested safety training programs are the 10 & 30 Hour OSHA Courses, Silica Competent Person, and First Aide and CPR.  These courses provides employees a better understanding of  safety requirements on construction sites and provide safety best practice for all construction site personnel.  It is now common for contracts to contain stipulations that employees on construction sites must have completed the these course and that Supervisors, Leads, Superintendents, Safety Teams, Laborers, Carpenters, Framers, Concrete Person, Roofers, Electricians, and Construction Site Managers have these courses and certification.  

These courses provide and excellent overview for construction employees/laborers/supervisors/foremen with safety and health responsibilities and for employees involved in general construction work duties. The courses provide the following:   

Open to anyone in the construction industry

OSHA 10 Hour Course:

This course provides an excellent overview for construction employees/laborers/supervisors/foremen with safety and health responsibilities and for employees involved in safety teams and committees and general work duties. The course will provide an introduction to OSHA policies, procedures and standards and basic occupations, as well as safety and health principles. Special emphasis is placed on the most hazardous areas covered by the OSHA standards. Prepares participants for OSHA inspections, and helps each person to understand how OSHA regulation affects the job site.Upon successful completion of the course, participants will receive an OSHA construction safety and health 10-hour card.  This course is taught in English only.

 OSHA 10-Hour Topics Include:

  • Introduction to OSHA
  • Inspection citations and penalties
  • General provisions for construction safety
  • Occupational health and industrial hygiene
  • Personal protective equipment
  • Electrical safety
  • Excavation
  • Fall protection
  • Scaffolding
  • Hazard communication

Who Should Attend? construction employees/laborers/supervisors/foremen with safety and health responsibilities and for employees involved in safety teams and committees and general work duties.

Scheduled Courses:  

Course 1:

Dates:           Day 1—April 26, 2019,  Day 2—April 29, 2019.

Times:          8 am to 2pm each day.  Includes lite breakfast and lunch. If students have special dietary                                                                    needs please bring your own food.

Location:      Waverly Park Business Complex, 604 South King Street, Mansion Bldg., Basement                       

                     Conference Room, Leesburg, VA 20175

Cost:            $199.00 per person.  Minimum 7 people for class to go, Maximum 10 people. 

To Register:  Call (703)779-7330 or website: https://scssafetyandhealth.com/osha-safety-training-classes/osha-10-hour-construction-industry/

Questions:  email info@scssafetyandhealth.com

++++++++++++++++++++++++++++++++++++++++++

Course 2:

Dates:         Day 1—July 19, 2019,  Day 2—July 22, 2019.

Times:        8 am to 2pm each day.  Includes lite breakfast and lunch. If students have special dietary                                                                    needs please bring your own food.

Location:    Waverly Park Business Complex, 604 South King Street, Mansion Bldg., Basement               

                   Conference Room,  Leesburg, VA 20175

Cost:          $199.00 per person.  Minimum 7 people for class to go, Maximum 10 people. 

To Register:  Call (703)779-7330 or https://scssafetyandhealth.com/osha-safety-training-classes/osha-10-hour-construction-industry/

Questions: email info@scssafetyandhealth.com

——————————————————————————————————————————————–

OSHA 30 Hour Course: 

The course combines important textual information with relevant, real-life examples from the field.  This course provides a comprehensive safety training experience, an overview to OSHA policies, procedures and standards and basic occupations, as well as safety and health principles. Additionally, the course covers a wide range of workplace hazards covered by the OSHA standards. Students will leave the course with an excellent working knowledge of OSHA and how it affects them in their work. Upon successful completion of the course, participants will receive an OSHA construction safety and health 30-hour card.  This course is taught in English only.

OSHA 30-Hour Topics:

  • Intro to OSHA and the OSH Act, Inspections, Citations, and Penalties, OSHA Record-keeping,  General Provisions,  Occupational Health and Environmental Controls, HAZCOM,  Personal Protective Equipment,  Fire Prevention and Protection,  Material Handling,  Scaffolds,  Electrical,  Fall Protection,  Excavation,  Signs, Signals, and Barricades, Motor Vehicles, Rollover Protective Structures, Highway Construction Safety, Lockout/Tagout, Powered Industrial Trucks,  Cranes, Confined Space.

Who Should Attend? Safety and Project Managers, Management Staff, Supervisors and Lead Persons, Employees involved with safety operations.

Scheduled Courses: June 2019

Dates:        Day 1: June 11, 2019,  Day 2: June 13, 2019, Day 3: June 18, 2019, Day 4:June 20, 2019.

Times:       8 am to 5 pm each day.  Includes lite breakfast and lunch. If students have special dietary                                                                    needs please bring your own food.

Location:  Paul Davis Restoration of Northern Virginia – 44601 Guilford Drive Suite 100,

                 Ashburn Va  20147  

Cost:         $525.00  per person.  Minimum 10 people for class to go, Maximum 30 people. 

To Register:  Call (703)779-7330 or https://scssafetyandhealth.com/osha-safety-training-classes/osha-30-hour-for-the-construction-industry-course/

Questions: email info@scssafetyandhealth.com 

 


Silica Competent Person Training  – 4 Hour  

Exposure to respirable crystalline silica can cause silicosis, lung cancer, other respiratory diseases and kidney disease. About two million construction workers are exposed in over 600,000 workplaces. OSHA estimates more than 840,000 workers are exposed to silica levels that exceed the new permissible exposure limit. Workers and contractors need to recognize the hazard, understand the risk factors and work safety with silica. As of September 23, 2017, OSHA requires construction companies to adequately protect employees from respirable crystalline silica exposure and assure complete compliance and implement a written silica plan. 

The Rule: This regulation, 29 CFR 1926.1153, is enforceable immediately and each company must document compliance with this rule. The rule mandates all construction employers covered by the standard to have a written exposure control plan and designate a competent person.  

The Silica Competent Person Training class will allow attendees to act as the company’s designated competent person as required by OSHA’s new silica standard.  This Competent Person will complete an exposure assessment for tasks that may present an occupational exposure to silica dust and follow a set of protective engineering and administrative methods to reduce risk.  Upon successful completion of the course, participants will receive an certificate of completion.

Who Should Attend? Safety and Project Managers, Management Staff, Supervisors, Lead Persons, and Employees involved with safety operations or silica operations. This class will be taught in English only.

Scheduled Courses 2019:

Course 1:

Date:  May 9, 2019.

Times: 8 am to 12 Noon.  Includes lite breakfast. If students have special dietary needs please bring your own food.

Location:  Paul Davis Restoration of Northern Virginia – 44601 Guilford Drive Suite 100,

                  Ashburn Va  20147  

Cost: $60.00  per person.  Minimum 10 people for class to go, Maximum 30 people. 

To Register:  Call (703)779-7330 or https://scssafetyandhealth.com/osha-safety-training-classes/silica-training-for-the-competent-person/

Questions: email info@scssafetyandhealth.com         

Course 2:

Date:  July 11, 2019.

Times: 8 am to 12 Noon.  Includes lite breakfast. If students have special dietary needs please bring your own food.

Location:  Paul Davis Restoration of Northern Virginia – 44601 Guilford Drive Suite 100,

                  Ashburn Va  20147  

Cost: $60.00  per person.  Minimum 10 people for class to go, Maximum 30 people. 

To Register:  Call (703)779-7330 or https://scssafetyandhealth.com/osha-safety-training-classes/silica-training-for-the-competent-person/

Questions: email info@scssafetyandhealth.com

——————————————————————————————————————-

CPR/AED and Basic First Aid Classes

SCS Safety Health & Security Associates is offering CPR/AED and Basic First Aid courses on a monthly basis. Our CPR and First Aid Courses are We provide open public courses five (5) times a month, at three (3) different locations in Leesburg and Ashburn, VA.  The locations are Blue Ridge Speech and Hearing in Lansdowne, VA, Healthworks of Northern Virginia in Leesburg, VA, and Moon River Nursing Careers Center in Ashburn, VA, and they respectfully provide locations for our classes for public offerings. The courses are American Safety and Health Institute (ASHI) training programs, which are based in the AHA and International Liaison Committee on Resuscitation or ILCOR standards, which is the governing body for standards of resuscitation and first aid techniques and instruction internationally. These are based on the same courses as American Heart Association courses, in a different format.

Types of Courses:

There are three types of courses provided at our sites.  1. CPR/AED and Basic First Aid which is structured for people in the workplace and community. 2. Pediatric CPR/AED and Basic First Aid which is structured for Preschool teachers and daycare providers, and 3. Basic Life Support (BLS) for the Healthcare Provider which is structured for all Healthcare Providers, including Nurses, EMS Personnel of all levels, Doctors, and other Allied Healthcare Providers.   

These classes are Blended Learning classes.  Blended Learning is designed to cut down on the time spent in the classroom, and is designed to provide more hands on learning time.  There are two parts to this course.  Part one is the online class, and Part two is the scheduled hands-on skills practical and testing. These classes will be taught in English only.

Who Should Attend? Everyone. 

Dates: Classes offered each month, on the First Thursday and Saturday, Second Wednesday and Saturday, and third Tuesday of each month.

Times: Classes on Tuesday & Wednesday evenings will start promptly at 6:30 PM. Classes on Thursday evening will start promptly at 6:00 PM, and classes on Saturday mornings will start promptly at 9 AM

Cost: CPR/AED and Basic First Aid is $80.00 per person. Pediatric CPR/AED and Basic First Aid in $80 per person. Basic Life Support Healthcare Provider is $95 per person.  Minimum people for class to go is 5 people, Maximum 8 people. 

To Register:  Call (703)779-7330 or use the website at https://scssafetyandhealth.com/upcoming-courses-2/

 

See our website for cancellation and refund policy. SCS reserves the right to cancel any course.